It took us a little while to get the area cleaned up where the new building would go. We decided to place it at the end of the shed so that we wouldn't have to go too far to get to it. We considered placing it behind the one we are living in or at the very end of the building with the porch facing the road but we felt that it would be too inconvenient when the weather is bad. We decided against joining the buildings because they have different roof lines and you never know if we will want to move the building at some point in the future.
We wanted a painted building because the paint lasts longer than the stains put on the building. We ordered this one and had to wait two weeks for it to be built. In the pictures the paint looks gray but we had it painted a taupe color with almond trim. We also went with a metal roof to make it easier for collecting rain water. The building on the lot had a wooden door but we went with a steel door so that it will close easily and it has a lock!
As you can see from the picture above, a shed is brought in on a flat bed truck and it simply slides off into place. Once he has the building on the ground it can be leveled. We thought we might need to have some blocks to level the building but he brought some scrap wood from the plant that was used to bring the building level.
He used a standard jack to lift the building and of course checked it with a level. As you can see the backs of the buildings are not even. We did this so we wouldn't lose the window on the larger shed by looking out and only seeing a wall.
Of course, no sooner was the building of the truck than the kids had to go check it out.
And here she is! The latest edition to the homestead. eventually we would like to build a deck between the buildings with a cover. We left about four feet between the buildings so we can get to the air conditioner and it will also give us a place to stack firewood close to the door. Stay tuned for updates. Hopefully this little project will show you how you can convert a shed into more than something for storage.
No comments:
Post a Comment